Siemens EQ6 water tank bypass
Posted by: Celina February 28, 2024 02:49 am
Hello everyone,
I once saw on Youtube that you can bridge the water tank of the EQ6 with a magnet, can someone explain to me what I have to pay attention to because of the strength of the magnet? I don't necessarily want to destroy the circuit board of the reed switch with a short circuit or something.
Many thanks in advance ????
Posted by: Bohne007 March 25, 2024 10:15 am
Hi,
I assume you want to bypass to check some functions. I also have a problem at the moment and therefore removed the fairings according to the YouTube instructions. Once you have removed the cover, it is relatively easy to refit the left-hand panel, which also houses the water tank. All you have to do is fasten or unlock the lower clips. The machine can then be operated or tested in its original state, whereby a contact switch on the right-hand side, which is closed via the removable cover, must be bridged.
Bean2cup.org > Siemens > Siemens EQ6 water tank bypass