Technical similarities of construction
Posted by: Tha_Falkner February 13, 2013 10:00 pm
Hello dear people,
I am owner of a Gaggia Titanium. Unfortunately, she is slowly getting into her years with 25,000 references by now. As I am technically quite talented I would like to do a lot on my own. I have a few questions about the technical similarities between Gaggia and Saeco.
The Titanium should be relatively identical with the Saeco Incanto. Of these there is the normal version and the "Digital" To what extent are the following parts identical in construction with the Gaggia Titanium ? :
Brew group
Actuator motor brew group
Blank
Water pump
Flow-through heater
Grinder
Grinder motor
>It would be nice to copy the parts simply and just write yes or no back. If the thing is a bit more complicated I am also grateful for detailed paraphrases.
Love Greetings
Posted by: adem9438 November 26, 2013 09:11 am
I've had the same problem since today. Have you been able to fix the problem in the meantime?
Posted by: Gast_Frank February 26, 2015 11:57 am
Hello,
I would like to join the above entries. With the freshly purchased used titanium I would also like to go deeper into the cleaning/maintenance. Therefore my question:
- Are there detailed instructions for maintenance?
- can components/seals of identical Saeco be used?
- grateful for any feedback 
Posted by: numberonedefender February 26, 2015 04:35 pm
There is every imaginable manual on the net for the largely identical Saeco Incanto, all parts of the interior are compatible...
Bean2cup.org > Gaggia > Technical similarities of construction