Posted by: Gast_Axel September 25, 2023 03:37 pm
Dear community,
I'm really desperate and now turn to you!
I have a Jura Impressa F50, which no longer outputs coffee.
Brewing group as well as drainage valve revised and outlet valve renewed.
It was decalcified several times, pump also delivers adequate amount of water.
Now the machine (in my opinion) flushes correctly?--.> See video
https://youtu.be/SGpc8mMRpLk
However, ifI now press coffee it rinses briefly, but then the magnetic pin at the bottom of the drain valve suddenly no longer jumps to the side, so that water can get into the brewing unit and runs everything into the bowl --> See video
https://youtu.be/J0h-Abnf_pk
I hope you can help me, I really do not know what to do...
Thank you and LG
Axel
Posted by: Schlawi September 25, 2023 05:08 pm
First turn in the screw at the bottom of the drainage valve. It is missing.
And then we look further.
Posted by: Almaty September 25, 2023 05:53 pm
How many people has this screw already brought to despair!:D
Posted by: Schlawi September 25, 2023 05:58 pm
I think this has happened to everyone.
Bean2cup.org > Jura > Jura Impressa F50 Trester trocken