Posted by: smallqp April 30, 2012 05:17 pm
Quickmill 05000A
Brewing process runs normally until the piston does NOT return to the home position after entering the brewing group and pressing. Motor is controlled - hum clearly audible - but does not move upwards.
After switching off and a waiting time -
After a short OFF or switching on the error remains = motor is activated -
The piston returns to the home position after the 3 beeps sound!
Trat only 2x sporadically, now the error occurs with every attempt.
Before I open the machine once, someone has an idea what the problem could be ?
MfG
Thomas
Posted by: smallqp May 07, 2012 08:55 am
Hello,
none because the etas could say ?
The problem is more precise:
The brewing process runs normally, powder, flask n. If the motor (humming) is still running down PRESS and against a stop ?
?: Limit stop piston = reversal of upward movement ?
?: Gear is stuck - but why is it after the delayed restart - what can cool down...?
mfg
Thomas
Posted by: schongezahlt November 14, 2012 10:08 am
Hi,
badly I have the same problem.
Have you found a solution in the meantime?
Many greetings,
Constantin
Bean2cup.org > Quickmill > Piston remains in brewing position