jura ena 8 error message
Posted by: juracafe61 April 20, 2024 07:22 pm
Hello
What are the possible problems with this message, which displays the missing water tank, on Jura ena 8.
No answer on the subject either on the internet or in the manual.
Thank you for your help
Posted by: kaffeechris April 20, 2024 09:29 pm
Hello, the first thing I would do is take a magnet (pin magnet from the fridge or pin board)
and place it on the housing where the water tank magnet is located.
If something happens then, the magnet in the water tank is too weak.
Attach it higher as the magnet floats in the water tank.
Nothing? Then the reed sensor is defective.
Greetings
Posted by: Schlawi April 21, 2024 11:58 am
The ENA8 measures via a sensor. There is no magnet in the water tank. It is possible that the sensor is defectivehttps://www.juraprofi.de/Jura-Ersatzteile/Elektronik-und-Trafo/Sensor-Wasserstand-fuer-Jura-Vollautomaten::15625.html
https://www.juraprofi.de/Jura-Ersatzteile/Elektronik-und-Trafo/Sensor-Wasserstand-fuer-Jura-Vollautomaten::15625.html
Posted by: kaffeechris April 21, 2024 01:09 pm
Well then Sensor... so may it be.
Bean2cup.org > General > jura ena 8 error message