Advanced search

back

New Topic

ESAM 03.110 Hardly any washing, coffee only drips

IlkaKo

April 03, 2020 06:18 pm

*

Coffee drinker

Group: Mitglieder

Posts: 1

Member No.: 38174

Joined: April 03, 2020

Hello, who can help me: my machine hardly rinses/ coffee runs very slowly. The pump is working, but during rinsing, maybe only 1/3 of the water comes out than last week and to fill the cup with coffee takes the machine forever.
I have decalcified the machine in normal operation, cleaned the brewing unit and coffee channel/outlet. Could the pump be defective, is it worth
repairing?

Thank you for

helpIlka

Steinhaeger666

April 07, 2020 02:30 pm

*

Advanced

Group: Mitglieder

Posts: 294

Member No.: 25101

Joined: September 12, 2014

It can be the pump, but it doesn't have to be.
I rather think that the brew head has clogged up and possibly also the
brewing group.

Define "Brew group cleaned".



Only external rinsing is not enough. The crema valve and the sieve

also clog up

with time

. It is best to

disassemble the brewing head and brewing group, clean them with a special coffee cleaner and reassemble them with new seals

.

Gast_Ilka

April 07, 2020 03:23 pm

Unregistered

QUOTE (Steinhaeger666 @ Tuesday, 07 April 2020, 14:30 hrs)
It can be the pump, but it doesn't have to be.
I rather think that the brew head has clogged up and possibly also the brewing group.
Define "Brew group cleaned".
Only external rinsing is not enough. The crema valve and the sieve also clog up with time.
It is best to disassemble the brewing head and brewing group, clean them with a special coffee cleaner and reassemble them with new seals.




Thanks for answering.
I had already unscrewed the sieve and cleaned
it.

Disassemble it - will I try

Gast_Ilka

April 07, 2020 03:26 pm

Unregistered

QUOTE (Guest_Ilka @ Tuesday, 07 April 2020, 15:23 h)
QUOTE (Steinhaeger666 @ Tuesday, 07 April 2020, 14:30 hrs)
It can be the pump, but it doesn't have to be.
I rather think that the brew head has clogged up and possibly also the brewing group.
Define "Brew group cleaned".
Only external rinsing is not enough. The crema valve and the sieve also clog up with time.
It is best to disassemble the brewing head and brewing group, clean them with a special coffee cleaner and reassemble them with new seals.




Thanks for answering.
I had already unscrewed the sieve and cleaned it.
Disassemble it - will I try


Oh, brewhead - I know, stupid question, but where does he sit / how do I get at it. Unfortunately, I only have the 0815 manual which offers the standard answers

Steinhaeger666

April 13, 2020 09:12 am

*

Advanced

Group: Mitglieder

Posts: 294

Member No.: 25101

Joined: September 12, 2014

To remove the brewing head, you have to unscrew the rear wall, the side walls and the upper housing part. You can also find further instructions at "KomTra.de".

Schlawi

April 13, 2020 06:01 pm

*

Expert

Group: Mitglieder

Posts: 1103

Member No.: 14628

Joined: December 26, 2011

You could also start by decalcifying the upper brewing flask with decalcifier. Place the descaler in the water tank and repeatedly rinse or, in test mode, move the drive upwards and then switch on the pump. It is then possible that the blockage will be removed.

back

New Topic

Print this topic
Next Oldest Next Newest