Neff CV 7760 N

Hello,
I have had a Neff 7760 fully automatic coffee maker since 2009. Meanwhile, hardly any coffee comes out of the two outlet nozzles. Great if I decalcify the machine then the water only goes through the first nozzle but never through the coffee spout. I can remove the aperture but then I can only reach the milk/hot water nozzle.
The two coffee nozzles are not accessible behind the plastic crate.
How do I get them out / cleaned ?
I'm at a loss


>LG Tusssi

If you do not get the coffee spout removed then try it with compressed air spray from the hardware store.

short compressed air shocks from below into the coffee spout..from approx. 1 cm distance...

Hello,
ja thank you that would also be an idea. But I have read here quite many contributions where the members have found here then nevertheless a way to these evil jets to come. I also read that the Neff machine is actually a Siemens EQ 7. But unfortunately I can't find any instructions how to get these coffee nozzles for this machine.

Lg Tussi

It is a built-in device or... I have just looked at the device on the Internet... with an EQ 7, the device has nothing to do with... But there is a similar series from Siemens.

How the coffee spout is removed exactly or if it is light or heavy I cannot tell you either.

Hello Martin ,
but thanks :-)
Lg chick

Is there a remedy now?

Today one of the two nozzles said goodbye to me and the coffee seems to be leaking from another place.

I'm a little over my head how to get the nozzles clean. Prockling with a toothpick hasn't helped at all.

Neff C77V60N01

Hello, try it with whistle cleaner and then a six pack of cleaning tablets.
Other order the spout again and install.

MfG Chris

--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.

--------------------
Alle Tips und Hinweise erfolgen nach bestem Wissen - die Verantwortung trägt jedoch der Ausführende.
Daher bitte lieber einmal zu viel als einmal zu wenig fragen.

Vor allen manuellen Arbeiten am Gerät den Netzstecker ziehen !

Now I worked the outlet with a needle for the first time and seem to have had some success. Coffee is running again.

Nevertheless I would like to clean it thoroughly.

Had bought the machine used (was at an exhibition kitchen). What do I have to unscrew?

Can I only see the mini Torx screws on top of the fast one, which extend over the whole upper part?

Helpful posts. Where the tooth puck was suggested..... upgrade option available..... I used the thickest interdental brush I could find. Far more coffee sludge was didlodged. Working perfectly again

Obviously worked better than my predictive text.