Hello all.
I have a Saeco Moltio the error code 15.
According to instructions I measured the two thermostats through.
One was defective.
As a result I replaced that one and all was well again. I was able to pull a cafe, but as soon as the first cappuccino was pulled, the error was back.
Do I understand correctly that the "thermostats" are more like thermal fuses? As soon as the boiler gets too hot, the thermostats trip and turn off the heating?
The heater/boiler gets hot and has about 27 ohms.
I would now have the control board in the suspicion ...
Can someone say something about it and bring some light into the darkness?
Thanks and greetings
close
Share this post: