Power electronics Caffeo CI E970 Component defective

Hello,
great contribution has already helped me so
much.
I also have the same problem only that the IC is whole. What I am still missing is the F2 - what kind of fuse is that and where can I get something like that?
It
would be great if someone
could tell
me something
.

Many thanks in

advance. MfGandy

Hello, has anyone figured out which fuse you can solder in there? As far as I know there was a track fuse there before and I have no information about the current it should withstand to place another one there. GreetingsDominik

Got the same problem with fuse F2. When packing in the box, there was probably still some water in the machine and unfortunately it was in the box with its back to the ground. Water flowed on the board. In the new apartment unpacked, plugged in and boom. Nothing goes more. Which fuse should I solder in? Please thank you.

Hello , which diodes SMD are that the front is defective with me ,,,, have changed the variation , but has again made bang , the electrolytic capacitor I had also changed , think that now the blue round fuse is broken . Thanks

Does anyone know where to get the right varistor here? About Mouser costs the unfortunately 20 € shipping... found nowhere else in D...
Designation is the CNR-14D431K

Good day folks!

Have 1:1 the same on my board!
Unfortunately, the transformer TP1 is also scorched with me and the winding is torn off.
I find the part unfortunately nowhere online when I type the number on it "40212-00-01" or "1321".

Can someone please help me at this point?

Many thanksGreetings
Micha

Bună ziua, ce piesă este T11

I have a problem with the Melitta CI
board damaged - the mill cycles on for 1 sec and pauses even on standby.
Which component on the board could be for replacement ?