Water temperature PrimaDonna ESAM6600 too low?

Hello,

is new here and wanted to ask a question. I have been the owner of a DeLonghi PrimaDonna ESAM6600 for about 2 years. For quite some time now, I have unfortunately noticed that the temperature of espresso or normal coffee is no longer really hot. In the settings I have of course set the water temperature to hot.

Has anyone possibly had these experiences and has a tip for me?

LG

You have a guarantee, right? If yes, just get in touch with DL. Possibly a heating coil at the thermoblock is defective.

Gruß Stefan

--------------------
Esam 6600 PrimaDonna
Ich helfe gerne und freue mich über jede Rückmeldung, was leider nicht immer vorkommt. Fragen werden NUR im Forum beantwortet.

Mal bist du Hund, mal bist du Baum.

If I have to look again, I can't remember exactly when you bought it..

That would be the best, of course, if it could still run on warranty..

Thank you...

you have 3 years or 5000 cups long warranty

--------------------
Alle Tips und Hinweise erfolgen nach bestem Wissen - die Verantwortung trägt jedoch der Ausführende.
Daher bitte lieber einmal zu viel als einmal zu wenig fragen.

Vor allen manuellen Arbeiten am Gerät den Netzstecker ziehen !

I have the same problem with my coffee machine. The water's not getting hot enough. Device is now 5 years old. Can anyone help me?

How hot is it gonna get? Measure.

Do you have a multimeter and can operate it?

--------------------
Nach vielen verschiedenen KVA habe ich jetzt meinen Seelenfrieden. WMF 800 :-)

www.DeMichaelLonghi.de

Hello together,

same problem, my coffee could be much hotter.
I measured max. 76° at the beginning of brewing. At the end of the brewing process, the maximum cup quantity is only approx. 68-69° at the end of the brewing process, so that the initial coffee temperature is approx. 65° when the cup is preheated.
The milk is heated to approx. 50° ...

My 6600 is approx. 4 years old and has only approx. 4000 brewing processes, is of course regularly descaled.

swentzi

Hello,

had the problem too. Only after 4 years, then after one year.
There is definitely a heating spiral defective.
That means: a new thermoblock has to be made.

Since there are excellent instructions for installing yourself, I installed the heating myself at that time.Cost: 105.- €, with installation it costs surely 200 -250 €

After one year the same mistake.
Then for 150 € an Unold ordered ( knife return with 48 cups of cover ).
Now standing at 1000 cups.

greetings

Pavilion49