Advanced search

back

New Topic

Krups EA9010 Brewing piston problem

Brewing piston does not stay down

Ranni

June 03, 2021 09:51 am

*

Coffee drinker

Group: Mitglieder

Posts: 1

Member No.: 43758

Joined: June 03, 2021

Hello,
I am new here on the forum, maybe someone can help me?
During the brewing process, the brewing cylinder is pushed upwards.
The longer the process runs, the further it pushes in upwards.
Pomace is then also just squishy.
Would be very happy for your help!




Olli Gut

July 02, 2021 04:36 pm

*

Coffee drinker

Group: Mitglieder

Posts: 3

Member No.: 43962

Joined: June 30, 2021

Hello, I wanted to hear if you have solved your problem in the meantime? With me it looks similar; after brewing, the plunger moves out again, a very wet Trester is ejected and then rises 2-3 times water in the brewing unit. The drip tray is then almost full. I have checked the seals (are at least not obviously defective) and cleaned the drain valve. Maybe someone has a tip?
Greetings Olli

back

New Topic

Print this topic
Next Oldest Next Newest