AEG Caffe Silenzio CS 5000 Water tank LED flashes

hallo

since yesterday the led of the water tank flashes and the cups are not completely full anymore.
tank incl. float was cleaned by me ( did not bring any success
then I tried to decalcify the machine, but it stopped this process.
only when i helped to decalcify it, ( i.e. ) the hot water nozzle was turned up and down by hand during the decalcification process
. so the process was delayed,
but the program ran until the end ( also this didn't work

i hope that someone can give me a tip.

gruß

stephan

Hello clean the flowmeter properly and all water carrying hoses.

MfG Chris

--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.

The flowmeter is the white round turbine that virtually counts the amount of water. Pull off input and output hose. Turn upper part counterclockwise vigorously. Upper part comes loose, so the whole thing opens up. Saucepan thoroughly. The wheel must rotate easily when being blown in, similar to a windmill. Also clean hoses with a hose brush at best. But if the device is still not working satisfactorily, then a new flowmeter is needed.

HWS