Bosch Verobar 100 Reset
Posted by: Simin March 02, 2014 06:32 pm
Hello friends of the coffee pleasure,
I have here a problem with my Bosch Verobar 100 and do not know further. After the hotline couldn't help me either, I hope for your support:
I started the weekly cleaning program "Calc'n Clean" today, which also went through normally up to the point "coffee spout". However then - for me for the first time - appeared in the display "put on milk foamer". Since that time the machine has stopped and doesn't make a sound anymore - if I had a PC in front of me, I'd say it hung up "
The hotline advised me to disconnect the machine for an hour and then see it. Unfortunately this action had no effect, the machine still hangs at the same place.
I now put my hope on the community. Maybe someone has had the same problem before and can tell me how to do a "hard reset" at the Bosch Verobar 100 ?!?!?
Thank you and greetings
Simin
Posted by: Martin (Hobbytechniker) March 02, 2014 11:08 pm
This will be similar to the Siemens EQ7 ..This is the sister model of the Bosch Verobar 100..
Google times afterwards...
Posted by: Gast_Tamara September 04, 2020 03:28 pm
| QUOTE (Simin @ Sunday, 02 March 2014, 18:32 hrs) |
| Hello friends of coffee enjoyment, I have a problem here with my Bosch Verobar 100 and don't know what to do. Since the hotline could not help me either, I hope for your support: Today I started the weekly cleaning program "Calc'n Clean", which also ran normally up to the point "Swivel coffee spout". But then - for the first time for me - the display showed "Attach milk foamer". Since that time the machine has stopped and doesn't make a sound anymore - if I had a PC in front of me, I would say it has "hung up". The hotline advised me to disconnect the machine from the mains for an hour and then take a look. Unfortunately this action had no effect at all, the machine still hangs in the same place. I now place my hopes in the community. Maybe someone has had the same problem before and can tell me how to do a "hard reset" on the Bosch Verobar 100 ?!?!? Thank you and greetingsSimin |
Hello!
I have the same problem. How could you solve it?!
Posted by: Gast_Kaffeefreund January 21, 2022 05:13 pm
Hello,
unfortunately I have the same problem. Putting the milk foamer is not recognized and you can not get out of the cleaning program as a result.
Maybe someone has a solution?
Posted by: Gast_Kaffeefreund January 21, 2022 05:24 pm
How to reset the?
It is Bosch VeroSelection 300
Posted by: swolle January 21, 2022 07:08 pm
Keep arrow down and arrow up pressed while turning on main switch when werkreset is on release and press start
Posted by: Guest March 02, 2022 05:15 pm
| QUOTE (Guest_Coffee_friend @ Friday, 21 January 2022, 17:13) |
| Hello, i have the same problem unfortunately. Putting on the milk foamer is not recognized and you can not get out of the cleaning program because of it. Does anyone have a solution maybe? |
Hello everyone,
i have exactly the same problem.
Has anyone found a solution yet?
LG Lisa
Posted by: Gast_Nicole August 06, 2022 02:47 pm
| QUOTE (swolle @ Friday, 21 January 2022, 19:08) |
| Arrow down and arrow up hold down while turning on the main switch when werkreset is released and press start |
Hello what do you mean by main switch???
With me it always says restart device!
Am really clueless!
Lg Nicole
Posted by: TZGuest July 01, 2023 07:25 pm
I had the same issue and could not even switch the machine off. So I disconnected it from the mains power. Then while holding down the up and down arrow buttons I reconnected it again. That did the trick and factory reset the machine.
Posted by: T.Schmitz December 06, 2023 04:29 pm
It worked like a charm. The machine is working again, thank you very much for your help.
Bean2cup.org > Sonstige > Bosch Verobar 100 Reset