Piston remains in brewing position

Quickmill 05000A

Brewing process runs normally until the piston does NOT return to the home position after entering the brewing group and pressing. Motor is controlled - hum clearly audible - but does not move upwards.

After switching off and a waiting time -
After a short OFF or switching on the error remains = motor is activated -

The piston returns to the home position after the 3 beeps sound!

Trat only 2x sporadically, now the error occurs with every attempt.

Before I open the machine once, someone has an idea what the problem could be ?

MfG
Thomas

Hello,

none because the etas could say ?

The problem is more precise:
The brewing process runs normally, powder, flask n. If the motor (humming) is still running down PRESS and against a stop ?

?: Limit stop piston = reversal of upward movement ?

?: Gear is stuck - but why is it after the delayed restart - what can cool down...?

mfg
Thomas

Hi,

badly I have the same problem.

Have you found a solution in the meantime?



Many greetings,

Constantin