Posted by: beusat March 10, 2021 12:03 am
Hello
,there is always the question of how to open single ear clamps without damaging other parts. I recommend the use of a monierzange for this. If needed, please contact me via PN. I can still offer 1 unused (NEW) Monierzange with very good leverage.
Posted by: Gast_Frank March 10, 2021 08:12 am
Hello,
I have mine with a snap ring pliers expanded and then if necessary with a flat screwdriver still re-expanded.
After that the clamps were loose and I could take them off.
Posted by: Schlawi March 10, 2021 12:17 pm
Just always depends on how you get to the clamp and whether it is attached to a plastic part or metal. I use a side cutter. Since everyone will have their own tricks. With pliers you have a good lever arm. And you can also tie iron if it is not a coffee machine.
Bean2cup.org > Krups > Single ear clamp