After cleaning the ceramic valve

Hello everybody, the coffee machine got stuck in the cleaning program. I went to the service menu and quickly found out that the ceramic valve had a defect.
After the removal I found out that the problem was a broken cable. Cable renewed, and since the ceramic valve was already outside it was also
opened and cleaned. Everything assembled and now the "coffee water" runs out of the nozzle on the right. The coffee is completely dry and falls into the container in powder form. The ceramic valve "works" now controlled by the service menu in all positions. is it possible to assemble the ceramic valve incorrectly at all ? or have I connected the hoses incorrectly? greeting S3NS3

Please delete the wrong subforum, Thanks