Hello everyone an original ceramic valve burns you a hole in noble onion leather.
Disassemble with silicone grease the sealing washers, then I would order a new distributor head and mount the. If that does not work, because the ceramic valve has somehow said goodbye, then buy a new one, for Melitta or Jura re-solder or re-pin the plugs since " Miele" has a wide plug and Jura two single. Screw on the distributor head from "Miele" and then that should be OK again.
And here please give feedback.
Miele reserves the right to sell only to Miele customer service this ceramic valve.
So if you... then you look for a Miele dealer who can help you ....
--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.
close
Share this post: