Hi,
Where did you look? There are the BND, Komtra and many other dealers who supply spare parts for Jura machines. The article number for the sensor from Jura is 69605, simply enter "Jura 69605" into a search engine, for the grinding mechanism it is usually enough to exchange the grinding ring. For example
https://www.juraprofi.de/Jura-Ersatzteile/Mahlwerk/Mahlring-zu-Jura-Mahlwerk::12262.htmlWenn
the coffee gets hot and does not cause any problems I would not replace
the heating.
You can pump, but you don't have to. If you intend to do so, remember the gaskets for diaphragm regulators. The one on the pump and the one for the hose.
Revising the brewing unit from time to time is also no harm.
What has been done at the machine? And when? If it becomes too much at spare parts also the repair lump sum with Jura would possibly be profitable, tell them in advance, coffee not really hot, too thin etc. so that also everything is exchanged. I think it costs 200€ + shipping for the F50. You'd have to check with Law.
close
Share this post: