Krups Orchestro Dialogue

Hello everyone,
my Krups Orchestro Dialog wants me to press the hot water button all the time. It doesn't get out of this mode any more.
Had anyone any idea how to get out of it?
Or a trick how to reset the machine?

Greetings
Micha

What happens when you press the hot water button? If the machine simply wants to be vented, hot water should leak out and stop after some time. If there's no water, you should start looking for a constipation. If hot water comes and does not stop by itself, you should check the flowmeter.

--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.

Hello,
no blockage, when I press the hot water button, there is also water.
After that I am in the same menu again and the same game starts from the beginning.
I feel as if it has somehow hung up like a computer.

As I said: If the water flow does not stop by itself or the request for venting appears again and again, simply open the flowmeter and check for lime crumbs or similar. There is obviously no signal at the electronics that water is flowing at all.

--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.

Hello Manuel,
thank you for your interest in my problem.
Where do I find the flowmeter to open?

Greeting Micha

The best thing to do is to download a service manual from the net (Juraprofi or Komtra), and you'll find it immediately.

--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.

and it was the flowmeter, wasn't it? I have same problem
Mfg Sascha