Hello all,
I (Karsten) am new here and hope you can help me.
I have a KRUPS type EA8108. It pre-brews a bit, meaning it grinds the beans, then the brew head goes down and a small amount of water is pumped in. Normally after a second it then continues with the actual brewing process and coffee dispensing. That's how it is, but lately the machine depressurizes right after the pre-brew. Some water comes into the drip tray. The water comes out of the heating element, in the normal place where the pressure is regularly released at the end of the brewing process.
After some research, this could be related to possibly old seals of the brew head, which I have ordered as a precaution times (are not yet there). However, I would have expected then more that the pressure is pressed out at the top (past the seals) and I also have pressure loss during actual brewing. But the coffee is otherwise quite normal.
Hence the questions to you guys, what other causes could the outlined error pattern have? Every tip is welcome.
GreetingsKarsten
close
Share this post: