First of all many thanks for the answer!
I tried it myself today. Unfortunately the process had to be aborted. Somehow the machine smelled something and nothing came out in front and it did not finish the coffee run. If then something came out uncontrolled behind left next to the grape marc cup. When I then switched off the machine and repositioned myself to get the brewing unit out again, coffee came out of the spout on the front left, but I can't tell where it came from.
I looked at the brewing unit again. The water comes in at the bottom and pushes it into the cylinder, right? At the top comes the sieve and above is the spout. When I blow into the upper tube, an "air" hole comes out at the top. If I shut that, she wouldn't have to come out to the screen support?
In other forums I read something about the drainage valve. I also removed, dismantled, cleaned and reinstalled it. Unfortunately without success.
--------------------
Nivona 850
close
Share this post: