Hello,
I need help urgently.
I bought a defective machine on ebay in the belief that I can manage it. (I see that differently now)
Problem:
When switching on the brewing group cracks
(but only half of it, the second booting and cracking is missing. I don't know how to describe this better).
The 1 cup and 2 cup displays flash and more doesn't work.
When I press the steam button and set the knob on the right to "open", only cold water comes out.
Coffee is not available. At the beginning the brewing group was very difficult, but now it is going again after cleaning.
resistors etc. were measured and due to the values a new thermoblock with Sesnor and a new Triac Ty2 were installed.
ABER:
When I plug in the machine now, all LED's light up, the brewing group drives as it is supposed to and then the machine goes off. It also can't be switched on again at the on/off switch (that worked before)
Did I do something wrong? Where could the error be?
close
Share this post: