Jura

Jura Impressa S9 struggling to pump water  

Last post by Flyboy (February 04, 2022)

Topic Starter Flyboy
Replies 0, Views 1191

Jura ena7 not starting after cleaning

Last post by -Gast_Quint- (January 27, 2022)

Topic Starter Gast_Quint
Replies 0, Views 1379

Jura ENA Micro 1 grinder burr replacement  

is it posible to replace grinder burrs

Last post by -Jura ena 1 lover- (January 23, 2022)

Topic Starter Jura ena 1 lover
Replies 0, Views 1268

Jura Z6 Cleaning  

Jura Z6 cleaning system

Last post by -Gast_Gege- (January 17, 2022)

Topic Starter Gast_Gege
Replies 0, Views 1493

Jura Z6 Cleaning  

Jura Z6 cleaning system

Last post by -Gast_Gege- (January 17, 2022)

Topic Starter Gast_Gege
Replies 0, Views 998

Cleaning  

Cleaning tablet does not dissolve

Last post by -Brigitte Weiß- (January 10, 2022)

Topic Starter Brigitte Weiß
Replies 0, Views 1218

A7 oath  

drawer missing

Last post by SamiF (January 07, 2022)

Topic Starter SamiF
Replies 0, Views 1066

Descaling  

Decalcification without request

Last post by -Gast_Gabi- (November 28, 2021)

Topic Starter Gast_Gabi
Replies 0, Views 1383

Impressa S95 does not flush......  

...only ground dry powder

Last post by Micky1985 (November 27, 2021)

Topic Starter Micky1985
Replies 0, Views 977

Fault no. 8, after installation of the BG  

Loud start after reference until standstill

Last post by -Segadlo- (November 15, 2021)

Topic Starter Segadlo
Replies 0, Views 1065

Fault no. 8, after installation of the BG  

Loud start after reference until standstill

Last post by -Segadlo- (November 15, 2021)

Topic Starter Segadlo
Replies 0, Views 1052

Jura a7 start manual descaling  

Last post by -Gast_Robert- (September 22, 2021)

Topic Starter Gast_Robert
Replies 0, Views 1256

Jura S9 - Error 4 message  

Repair costs

Last post by tubu (August 23, 2021)

Topic Starter tubu
Replies 0, Views 1885

Jura S95 no coffee  

Possibly defective control board?

Last post by j.lehnene (August 19, 2021)

Topic Starter j.lehnene
Replies 0, Views 926

Error message Fill powder  

JURA ENA Micro9 error message

Last post by FabianH (August 13, 2021)

Topic Starter FabianH
Replies 0, Views 1017

Jura X7C  

What Setting for 2 cups at the same time

Last post by coffeetcp66 (August 01, 2021)

Topic Starter coffeetcp66
Replies 0, Views 781

Jura X7C  

What Setting for 2 cups at the same time

Last post by coffeetcp66 (August 01, 2021)

Topic Starter coffeetcp66
Replies 0, Views 718

Jura ena4  

hums at rest

Last post by -Gast_Manuela- (July 04, 2021)

Topic Starter Gast_Manuela
Replies 0, Views 1066

Jura C60 display shows only red squares

Last post by Toolmaster (June 13, 2021)

Topic Starter Toolmaster
Replies 0, Views 1262

Jura z8 only drip

Is loud and it comes only drops

Last post by -Gast_Wolfgang- (June 13, 2021)

Topic Starter Gast_Wolfgang
Replies 0, Views 872

Jura  

Press Giga 5 Rotary Switch

Last post by -Gast_Luna- (June 09, 2021)

Topic Starter Gast_Luna
Replies 0, Views 1178

Grinding degree setting  

Last post by -Gast_Christian- (May 24, 2021)

Topic Starter Gast_Christian
Replies 0, Views 1009

Service life Impressa Z5  

Long service life

Last post by -Bert Visscher- (April 26, 2021)

Topic Starter Bert Visscher
Replies 0, Views 1424

JURA ENA 5 - Check drain valve motor  

More information wanted

Last post by worliplug (April 07, 2021)

Topic Starter worliplug
Replies 0, Views 1610

Jura J7 Display flackert

Touchscreen / Display flickers - Jura J7

Last post by -Gast_Werner- (April 02, 2021)

Topic Starter Hamero14
Replies 4, Views 2914