Melitta coffee variance csp f57 101 kein Wasser

Hello, everyone,

I'm at my wit's end now. After I had done the cleaning program there was no coffee and washing up was not possible anymore. So I did some research and exchanged parts. Now a new DV is installed and a new brewing unit. I checked the spout and rinsed it.
Why
does nothing
come
. I noticed that I can move the carrier - can that be a cause?
Here is a video that shows that the water runs into the DV and out through the bypass. If I
open
the inlet of the DV with a
small object the water will run out of the DV. So it would have to go into the BE. Hope someone can help meGreetings Thomas
Video varianza DV

Enclosed again the video link

Hello, Thomas,

The driver of your machine is defective. The driver releases the drainage valve and moves the water out through the drive, so that the water is then led over the brewing unit. In order to replace the driver, the Varianza must unfortunately be almost completely disassembled, as the drive for changing this part must be removed. Here the part at Juraprofi.
Greetings Alex

--------------------
Saeco Family
AEG Cafamosa CF85
Phillips HD5730
Siemens EQ7 L-Series
Melitta Caffeo CI

Hello,alex,

Thank you very much, I was afraid I would have to go back in there.

If I have trouble disassembling the parts, I'll contact you again.

Greetings Thomas

Hello, Alex,

wanted to write my success story.

In the meantime, the machine runs reliably every morning again.

I made the exchange easy and cut an access in the front without further ado.

Now the driver can easily be exchanged. It would basically make sense to adapt the device in this way.

Both exchange and cleaning are thus considerably simplified.

Thank you very much for the help.
Next time I will gladly
send

greetings to Tom