Advanced search

AEG CS 5000 frother defective?

Julian

April 26, 2016 05:00 pm

Unregistered

Mahlzeit.

I own the CS 5000 and am very satisfied with it.
Only recently water has been running out of the foamer during the brewing process.
I once exploited the foamer and placed it in a descaling solution. Unsuccessfully.

Somebody an idea?!

mfg

Julian

April 26, 2016 06:15 pm

Unregistered

I have just built and cleaned the upper brewing piston completely out of each other, unfortunately not successful.
The water comes once during the brewing process and after the brewer is disfigured, some water comes again.

jokel

April 27, 2016 05:11 am

*

Expert

Group: Mitglieder

Posts: 2594

Member No.: 1411

Joined: September 26, 2007

The seals in the HWD valve are worn out. Unfortunately, they're not available separately.

Greeting Stefan



--------------------
Esam 6600 PrimaDonna
Ich helfe gerne und freue mich über jede Rückmeldung, was leider nicht immer vorkommt. Fragen werden NUR im Forum beantwortet.

Mal bist du Hund, mal bist du Baum.

julian

May 01, 2016 05:22 pm

Unregistered

thanks!
got hold of a used one on ebay.
send me a call when it's installed.
1000 thanks!
mfg

Gast_julian

May 28, 2016 10:15 am

Unregistered

Hello,
has changed the HWD valve now.
Couldn't test it yet. When I plug the machine into the power grid, all lamps light up briefly. When I then press the On/Off button, it shows me the "one coffee", "two coffees" and "general error". According to Google, it's the brewing unit, but when I'm in the test menu, where you can drive the brewing unit up and down, it works fine. Had the brewing unit already built completely out of each other, cleaned and re-greased. dry.gif

mfg