The problem with the descaling program is that it omits the brewing head.
The brewhead can be decalcified in 2 ways
:1. put decalcifying solution into the water tank and start the rinsing program every few minutes, then rinse with clean water. -
works but only with slight calcification.
2. remove the brewing head, dismantle it, decalcify and clean it manually. It is
best to reassemble with new seals - lubricate the
seals with silicone grease.
Before you do this, you can dismantle and clean your brewing unit and fit it with new seals.
You can find instructions for this e.g. at "Kom.Tra" or "BND Kaffeestudio".
close
Share this post: