No more coffee at the outlet only steam EQ6

Moin I have the problem that I bought a used device which showed the error message "please fill in carbonic acid free water" I thought it was maybe due to the impurities so I disassembled it and cleaned it completely from top to bottom jz no error message comes anymore but jz
comes only steam at the outlet
and a few dropsHat

someone

has a solution? At the

beginning when rinsing comes in contrast to the hot water cover

quite a lot of waterWhen

hot water

cover only steamMfg
thanks in
advanceSiemens

EQ.6 TE603501EN Series

300

Hello,

Just found this website while looking for a solution with a similar issue as yours.

My Siemens EQ6 series 700 rinse correctly when it is starting up and powering down.
The issue appears when I want to make an expresso or just get hot water.
The grinder grind nicely the beans, the brewing unit move to place correctly then I hear the pump running but there is almost no coffee flowing out. Once I hit the stop button the brewing unit start to move and hear the sound of steam release where it's brewing.

Did you have the same issue?

If yes, were you able to solve it and how?

Thanks in advance!

Hello,

I reply to my question as I was able to fix my coffee machine and I hope it will help someone else one day.

After un-mounting the left side panel behind the water tank, I replaced the following valve.


You will find the exact valve on siemens website by clicking on this link: https://www.siemens-home.bsh-group.com/fr/liste-des-produits/12015639#/Tabs=section-fitsappliance/Togglebox=manuals/.

I am really happy the enjoy my coffee machine again !