Hello
, had since a few days always the same, "Fill water circuit".
Then came automatic maintenance up to the described code 13, call the hotline.
The nice lady said I should unplug the machine for an hour and then
run it without
water filter, rinse at least 5 times and then that should be it.
Did not work, then I opened
the machine from the bottom
outside the warranty.
Then you can see the flowmeter and a water filter which was
totally covered with mud.
Have blown the flowmeter through, you hear a buzzing noise and then the fine filter in the direction of flow again and again with hot water cleaned and blown through. You have to be patient, the sludge is in it because only cold water is pulled
through the filter.
Looks disgusting, but in the end the water is heated.
I reassembled everything and then I filled the water circuit again, then rinsed it about 8 times.
Hot and delicious coffee
close
Share this post: