Krups EA82 no longer works
Posted by: Dobli01 June 12, 2020 07:15 pm
Hello everyone
, I have the following problem.
We connected the coffee machine to a power generator at a garden party, it smoked a little and then went out. It seems that the generator is
delivering too much voltage.
I took the machine apart and found out that this error does not occur anymore when I remove the plug J4 from the GSM 0300143 board. I then disconnected the motor from the connector J4 and plugged the connector in again. And the error does not appear any more. I have the voltage on the wires that go to the motor and the meter shows about 16V AC.
If someone had a hint where the error could be. I
would be glad
for any help.
Lg and thanks in advance
Markus
Bean2cup.org > Krups > Krups EA82 no longer works