Beautiful Swing Cafe

Hello, at our Cafe Bonitas Swing the coffee is painted, then the process stops and the flour ends up in the pomace container. I can't find anything about this on the Internet, and the operating instructions say the machine must be calibrated and refer to page 29. But there is only the description how to use the brewing unit. To make matters worse, the company Insolvent and the service hottie is no longer available. Does
anyone know about the error and can help, or can they tell me who knows and where I
can
turn
?

Best regards, Freddy

Hello, there is too much coffee set, go to the menu on Calibrate, enter the number 88, confirm with ok. As there are 2 different versions of the machine, there are 2 possibilities, one is set to 36, the other to 6.

Hello Rampi, I have the Swing Bull and the coffee is too thin and under the brewing group is often a lot of coffee powder Wolte calibrate was in the submenu top left I can only plus or minus10 left top Chinese characters when I press the machine grinds only the wars and below 0-10 and below 8-50- OFF I despair slowly. Lg Angela