Melitta Caffeo CI coffee runs inside

Angle on brewing cylinder broken off

KaffeeamMorgen

January 29, 2023 11:36 pm

Coffee drinker

Group: Mitglieder

Posts: 5

Member No.: 62649

Joined: January 29, 2023

Hello dear forum members,
I need help with my fully automatic coffee machine Melitta Caffeo CI.
The machine grinds coffee and the water is pumped, but the coffee runs into the marc container and into the drip tray. Looking at the brewing unit, I noticed that a piece of a small angle (like an inlet/outlet spout?) plastic is broken off on the brewing cylinder. Could this be the cause? And can this be replaced on the brewing cylinder without buying a completely new brewing unit?
I look forward to expert advice and thank you in advance.
Greetings

Schlawi

January 30, 2023 07:05 am

Expert

Group: Mitglieder

Posts: 1103

Member No.: 14628

Joined: December 26, 2011

Post a picture of the angle.

KaffeeamMorgen

January 30, 2023 06:39 pm

Coffee drinker

Group: Mitglieder

Posts: 5

Member No.: 62649

Joined: January 29, 2023

QUOTE (Schlawi @ Monday, 30 January 2023, 06:05 PM)

Post a picture of the angle.

Attached is a photo of the broken "angle" and at the top you can see where it broke off on the brewing cylinder (that is on the side of the brewing unit that would face the water tank when inserted).

Attached File (Number of downloads: 32)

IMG_20230130_171034_1_.pdf

Schlawi

January 30, 2023 09:31 pm

Expert

Group: Mitglieder

Posts: 1103

Member No.: 14628

Joined: December 26, 2011

This is the inlet connection.
https://www.juraprofi.de/Melitta-Ersatzteile/Brueheinheit-und-Antrieb/Einlaufstutzen-Melitta-Brueheinheit::14537.html

https://www.ebay.de/itm/284010122567

However, check that there is not another piece of the connection hanging in the drainage valve. Otherwise the new one will be broken again.

kaffeechris

January 30, 2023 09:43 pm

Expert

Group: Moderatoren

Posts: 2075

Member No.: 24425

Joined: May 29, 2014

Hello order silicone grease with you immediately so that the nozzle can easily enter the drainage valve.

--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.

KaffeeamMorgen

January 30, 2023 10:37 pm

Coffee drinker

Group: Mitglieder

Posts: 5

Member No.: 62649

Joined: January 29, 2023

First of all, thank you for the quick answers!
Do you think that the problem "coffee runs inside" will be solved?
And do I have to unscrew the entire brewing unit for the change and if so, what tool is needed?

kaffeechris

January 31, 2023 06:01 pm

Expert

Group: Moderatoren

Posts: 2075

Member No.: 24425

Joined: May 29, 2014

Hello you need a 10 Torx and look times whether the upper brew head is torn where the hose goes out in front, then the valve bridge that sits above the brew head, best to post photo evtl. can see that.
If you have the error then new brewing unit.

MfG Chris

--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.

KaffeeamMorgen

February 01, 2023 12:47 am

Coffee drinker

Group: Mitglieder

Posts: 5

Member No.: 62649

Joined: January 29, 2023

QUOTE (kaffeechris @ Tuesday, 31 January 2023, 17:01)

Hello you need a 10 Torx and look times whether the upper brew head is torn where the hose goes out in front, then the valve bridge that sits above the brew head, best photo adjust evtl. can see that.
If you have the error then new brewing unit.

MfG Chris

Is this view meant?
If directly worth a new brewing unit, where to buy?

Attached File (Number of downloads: 24)

IMG_20230131_234022_1_.pdf