So if it is water and no coffee is the brewing chamber or lower plunger in my opinion not the culprit.
Sounds to me like a safety stop due to lack of water, otherwise the plug symbol would be permanently on in the event of a defect.
Since your problem leaves much room for speculation, test the following first.
Check the water tank and the check valve for function.If water filter installed, remove it and test again.At the tap where the water tank is placed, check the fine screen.When the water tank is full, mark the level and let the machine stand overnight.
If something is missing, it is the seal at the inlet where the water tank is inserted, which are often leaking.
Flow meter is also a very common candidate.
The water at the steam and outlet nozzle comes out can be more likely to the valve block, or the water supply system.
Test times and please give feedbackGrussRalph
close
Share this post: