Hello,
I am the proud owner of a Melitta Caffeo Varianza CSP. Unfortunately, the machine was recently defective (brew group could not be removed, all the tricks like resetting the motor and co) did not help), so the machine was at the Melitta customer service, and now everything is so far good again and running.
But I noticed now that after the brewing process always some water remains in the brewing chamber. So when I remove the brew group and look inside from above. It doesn't matter if I remove the group with the machine switched on or off. There is always some water in it.
Is this normal, or with you also so?
Thank you very much!
CiaoMartin
close
Share this post: