Orchestro F860

I have the following problem with my Orchestro F 860: after I plug the power plug into the socket, the grinder runs without interruption. The complete cleaning of the machine has not been successful either. After loosening the screws I tried to remove the top cover, unfortunately without success. The cover is somehow fixed on the back of the device. How can I remove the blankets? Does anyone have a tip for me!

Hello,

You first have to remove the 4 oval head screws on the back (with a suitable wrench or e.g. with a pliers or in the drill chuck of a cordless screwdriver clamp), only then you can remove the upper part and the two side parts of the case !

lg

>Hannes

--------------------
Meine VAs bis jetzt :
AEG CaFamosa 81 (01.2002 bis 07.2006 )
Krups Orchestro FNF5 Plus ( 07.2006 - 09.2008 )
Delonghi ESAM 4300 (seit 01.2008 ) @home
Delonghi EAM 2500 (seit 01.2008 ) @work
Delonghi EAM 2500 (seit 03.2008 ) @parents in law

Meine Siebträgermaschinen und Mühle :
Gaggia New Baby Twin (09.2007 - 08.2008 ) >>> La Scala Butterfly (seit 06.2008 ) und Quickmill Apollo @home

There was a recall at Krups in this regard. I'd contact the hotline.

great tip with the Accuschrauber.Has worked great. Unfortunately I can't find the error.grinder still runs without interruption.thanks a lot anyway!!! Jörg

Hello, my electrician has already reckoned with the mistake. To determine which part on the board needs to be replaced would be a schematic of help. I've had the device since 2003/ 2004, but I'm sure the recall won't work anymore. Can I get a circuit diagram for my electrician?

The optocoupler number 3 (MOC 3062) and the triac number 1 (T435 600T) must be exchanged. Cost about 3 Euro.