Hello,
I repaired the Saeco on saturday first to prevent possible withdrawal symptoms 
.
As the weather on sunday was bad I disassembled the Krups again. Logic unit out on the back all parts checked. Nothing chars nothing broken (contacts). The plugs all looked through. The individual cables one after the other each contact nose checks - nothing. The logigprint is thermally discolored at one point (slightly tarnish). On the back there is a black cover, I can't see if anything has burned out under it. I can't find anything else. A few noses protrude from the lid through the print and are fused on the other side (intentionally 
). Can I put it down or not? I'd like to know if there's anything else that's burned out.
--------------------
Gruß Anderl
close
Share this post: