Advanced search

Miele cva 4060

Where to put the metal wire?

Silke1975

January 22, 2015 10:27 am

*

Coffee drinker

Group: Mitglieder

Posts: 3

Member No.: 26215

Joined: January 22, 2015

Hello dear forum members,
Cleaned the brewing unit today, because errors were displayed and the Miele customer service thought it would be a piece of cake....Worked first. Until the message Check brewing unit was displayed. When I opened the Miele CVA 4060 I found the metal wire, a kind of clasp 😩see photo. Now, of course, I don't know where to put it... can anyone please help me?????????? Thank you. I'll take care of it. Desperate...

Attached Image

kaffeechris

January 22, 2015 11:38 pm

*

Expert

Group: Moderatoren

Posts: 2077

Member No.: 24425

Joined: May 29, 2014

Hello, this belongs in the brewing group as a grape marc scraper, which is attached to the lower moving brewing cylinder, direction ejection.
Goggel will certainly show you a picture of it.
Mfg Chris



--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.

Silke1975

January 23, 2015 12:13 pm

*

Coffee drinker

Group: Mitglieder

Posts: 3

Member No.: 26215

Joined: January 22, 2015

First of all hello and thank you Chris. Now I jogged 2 hours after a picture and unfortunately found nothing. I entered your terms and the word scraper. I am absolutely stupid when it comes to the technology of my machine. Can you take a look at my new picture? Is it part of this? I had this part (of course by mistake blink.gif ) in your hand before I got the brewing unit out...

Or please add a goggle picture...I don't know...
Thank you!!!

Attached Image

kaffeechris

January 23, 2015 01:13 pm

*

Expert

Group: Moderatoren

Posts: 2077

Member No.: 24425

Joined: May 29, 2014

I'll see what I can find and adjust it.



--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.

kaffeechris

January 23, 2015 01:23 pm

*

Expert

Group: Moderatoren

Posts: 2077

Member No.: 24425

Joined: May 29, 2014

Here a photo from this forum of Unregistered "Irene" from 23.08.2008
here you can see where it goes. Must copy the link http..........











"Hello Fuxl,

had the engine again to "repair" this "service". Was on warranty, but brought exactly NOTHING.

The machine dirty after 3 coffees totally strongly, everywhere the coffee picks. The whole brew group is worn out, and a part of it (see picture) often jumps out. In the years before I didn't know at all that this part goes out ;-)!

http://wsa.at/bilder/saeco001.jpg

>I think the brew group was severely affected by the first service...

Bin quite "uncomfortable" at the moment - had really never had such problems before!

love greetings
Irene"



--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.

Silke1975

January 23, 2015 04:10 pm

*

Coffee drinker

Group: Mitglieder

Posts: 3

Member No.: 26215

Joined: January 22, 2015

biggrin.gif
I tried again thanks to your link. Wire is at least stuck, doesn't wiggle and errors are not displayed...coffee is running....
Thanks Chris-Du saved my WE!!!!!!

Gast_Erich

May 18, 2015 05:58 pm

Unregistered

Unfortunately I cannot determine the position of the wire - who will help me with a meaningful photo???

Thank you

Danceman

May 18, 2015 06:38 pm

*

Experienced

Group: Mitglieder

Posts: 563

Member No.: 23992

Joined: March 30, 2014

What photo? If you have the same brewing unit the photo should be enough? ;-)



--------------------
Pessimist: Ganz schön dunkel hier...
Optimist: Ich seh ein Licht am Ende des Tunnels...
Realist: Mist, da kommt ein Zug...
Zugführer: Was machen die 3 Deppen auf den Gleisen?