Krups EA8251 Increase grinding time?

Hello,
I recently repaired a Krups EA8251 at a friend's and found out that this machine has the same brew hit as my Krups EA9000. However, the coffee tastes better and more intense with me, while with the EA8251 everything over 100ml is brewed very path and thin.
That's why I stopped the time while grinding and see there:

EA8251: 8 seconds
EA9000: 15 seconds

And this with the same brew chamber size!

gibt´s in the EA8000 series somewhere a trick / secret menu to increase the grinding time?
Or possibly on the board a resistor / potiregler?

Many thanks

Try this

Set the coffee quantity for Krups XP 7220, 7240, 7250, EA 8050, 8080 etc
Pull the power plug
Remove the water tank
Remove the coffee cake container
Remove the cleaning slide
button "Press and hold prog"
Reconnect power plug < br> button "prog" can now be released < br>-set the coffee quantity in the menu in 5 steps (1 less to 5 more coffee powder)< br> < br> < br> greeting vegan

Hello good day.
I have a Krups EA 8010, I have no program button, have read at another place steam button press and set time with quantity button. But where do I see what time is set?
With greetings Heiz A.

Good evening,

The coffee grinder quantity can be set as follows on models without display:

pull mains plug out
-coffee cake container, remove cleaning slide and water tank
-steam button held down and plug mains plug in
-steam button can now be released

-coffee cake container, Put the cleaning slider and water tank back in place
set the coffee quantity regulator to minimum
set the cup under the coffee spout
press the button for normal coffee
blue lamp for On/Off lights

-use the coffee quantity regulator button to set the meal time
-4,1s meal = control light On/Off lights up
-4,3s meal = control light coffee cake container lights up
-4,5s meal = control light water tank lights up
-4,7s meal = control light Clean lights up
-4,9s meal = control light Calc lights up

Then press the service button
unplug power plug

love Shaneya

Hello good morning!
I've done everything according to the instructions, but what I don't get is how to set the div, sec on the coffee quantity knob ?
Thank you in advance, VG Heinzr.

Good evening,

If you want to set the meal to 4.5 seconds, turn the coffee quantity knob until the control light "water tank" lights up. For example, if you want to grind for 4.9 seconds, turn the coffee quantity control knob until "Calc" lights up.

Hello good day!
Many thanks for the explanation, I got it now.
Greetings Heinzr.

Hello together,

I would like to increase the amount of powder on my EA 8298 and I'm coming to the service menu with the entries 1-5 each corresponding to one key.
However, I didn't find out how to save the setting. After inserting the waste container, a French menu appears that prompts me to do something and, after wildly pressing the button, produces milk foam. After that, all that remains is to pull the plug.

The grinding time is still about 8 seconds.

What do I have to do after setting the amount to save it?

Many thanks

QUOTE (2EL @ Sunday, February 21, 2016, 13:45pm)

Hello together, I would like to increase the powder quantity at my EA 8298 with pleasure and come for it also into the service menu with the entries 1-5 which correspond to each key. However, I did not find out how I save the setting. After inserting the waste container, a French menu appears that prompts me to do something and, after wildly pressing the button, produces milk foam. After that I only have to pull the plug. The grinding time is still about 8 seconds. What do I have to do after setting the amount to save it? Many thanks

Hello, I have an EA829, I want to reduce the amount of coffee, I can change the setting from 1-5 in the menu, but how do I save it now?
Thanks in advance

tr>

QUOTE (klaus1809 @ Tuesday, October 31, 2017, 10:25am)

QUOTE (2EL @ Sunday, February 21, 2010)February 2016, 13:45 pm) Hello together, I would like to increase the powder quantity at my EA 8298 and get into the service menu with the entries 1-5 each corresponding to a key. However, I did not find out how to save the setting. After inserting the waste container, a French menu appears that prompts me to do something and, after wildly pressing the button, produces milk foam. After that, all that remains is to pull the plug. The grinding time is still about 8 seconds. What do I have to do after setting the amount to save it? Many thanks Hello, I have an EA829, want to reduce the amount of coffee, get into the menu can also change the setting from 1-5, but how do I save this now? Thanks in advance

I am in despair: I come into the hidden menu and can set the grinding time from 1-5, but the setting can not be saved.... I've tried everything, but it's interesting when I reinstall the coffee cake container after the change a French instruction comes, apparently you would have to go through some kind of "test cycle" now. In the end, however, the grinder starts to run without stopping - I had to pull the plug & vacuum with about 100g of ground espresso to remove.

Does anyone know the steps to increase the grinding time on a Krups EA829P?

QUOTE (HeinzR. @ Wednesday, February 03, 2016, 07:55 a.m.)

Hello good morning! I've done everything according to the instructions, but what I don't get is how to set the div, sec on the coffee quantity knob ? With best thanks in advance, VG Heinzr.

I have the same problem) Help if you please thank me in advance!

--------------------
https://www.deviceranking.de/tvbox/6366/sunvell-t95m

What do you need in this case?

--------------------
https://www.deviceranking.de/tvbox/6366/sunvell-t95m

ввфв

--------------------
https://www.deviceranking.de/tvbox/6366/sunvell-t95m

Hello, we have a Krups 892p since yesterday, which also worked well, until we tried just that with the meal as described above.
Since then it only says "Clean & reinsert protective compartment".
But we don't have a protective compartment? There was none - and the funny thing is that the machine ran perfectly before.
Can I reset the machine anyway?
love greetings and thanks

With me lamp after the adjustment permanently the coffee kitchen lamp although it empty and also correctly inserted. Is there someone has an idea what's going on now