Saeco Incanto SUP021Y

Hello community,

I recently got the above mentioned machine from a friend.
The first error of the machine was that the brewing group could no longer be used. I was able to correct the error with the help of the forum. For the time being I cleaned the brewing group roughly and made it passable without disassembling it. Intensive cleaning takes place when the machine can still be rescued.

In the net I read and tried the test function. When I turn the adjusting wheel to the right, the pump pumps, but the water comes out under the machine.
I haven't opened the case yet, but I'll do so today.

Gave you an idea what I can look at first?

Gladly I would have known the error codes of the machine.

>I thank you for your help.


Saeco Incanto

In the photo you can see a burst hose. He'll probably be responsible for the water loss.
Can someone tell me the best way to get me out of there?
Must be the Teflon hose L=235mm.
On this occasion I would like to change all hoses. Makes sense...or?

Would take out the entire inner workings. If you already have the machine open, there are only two screws at the front and two screws at the bottom and two screws at the right and left top. In the back two more screws for the cable box and maybe disassemble the hot water nozzle, then you can get out the inner life. There's another ground wire downstairs that you have to disconnect. Then you can screw relatively well everywhere on it.

Got the teflon hose outside already. Supply is ordered. I also ordered the maintenance package for the brewing group.
Thanks for the tip about the screws and the hot water nozzle. At the moment the machine is very spread out and I hardly got the parts.

Now all I need are the error codes.

Google times after "incanto service manual"
There I think should be pretty much everything relevant in it.

Welche fehlercodes????? Woher hast denn Mist?