Hello
,first of all thanks for the many posts in the forum, unfortunately I did not find the right one.
Before I repaired it, no more
coffee or water
came, the water ended up in the drip tray.
First I cleaned
the upper and lower brewing head, then the drainage valve. The problem:
After the start, the sign for Place
container underneath
flashes and it says Press Start.
When I press Start it flushes briefly, then the bar comes up as when heating up and the sign for Put under vessel and Press Start flashes again in the display. If I press Start again, it flushes a little longer but then the symbol for malfunction always appears (remove the power plug from the socket and plug it in again
after 10 seconds).
I tried this at least 10 times and don't know what to do. Is
there a way to read out errors? Is it possible to reset
the electronics of the coffee machine?
What did I offend, maybe the display
unplugging? LGThomas
close
Share this post: