My Melitta fully automatic coffee machine still makes big problems Too large quantities of water are rinsed into the containers during brewing.Already after switching onat the
first rinsing there is water in the marc container and in the drip tray.This water is not yet interspersed with coffee.Then during brewing, in my
opinion, too large quantities of waterare
rinsed into the drip tray and the marc container.Thiswater
is strongly interspersed with coffee..Schopn before the actual brewing, a smaller amount of coffee sludge is pushed into the marc container. I have already washed the drainage valve.The ceramic valve is absolutely dry Even a new brewing unit did not bring the desired success..If the coffee is boiled in sufficient quantity, is in,the Tresterschale no dry coffee cake ,but run coffee slush. There is also a small amount of coffee sludge on the coffee grinder's discharge surface, which is probably the amount of coffee sludge that ends up in the pomace container at the beginning of the next brewing cycle. Also I have the feeling that more and more coffee grounds are everywhere in the machine.Auch wenn es wegsauge, is sch schnel very quickly again coffee grounds in the fully automatic.Man should perhaps call the machine Vollkaffeautomat.Was can I now still do, to eliminate the error or should I yet contact the people who otherwise blow up ATMs.
I continue to ask for help and wish Allen a Happy New Year Greetings Bernd
close
Share this post: