QUOTE (Guest_Manuel @ Sunday, November 29, 2020, 15:31 PM) |
Hello, have a problem with my Siemens Eq.6. When rinsing and preparing coffee, little water or coffee comes out of the front of the nozzles. A lot ends up in the drip tray. The Bruheinheit I have testhalber installed in another machine. There it runs without problems. What could be the cause, if the brewing unit is intact? |
Hello, I had the same problem. I removed the ceramic valve and disassembled it. Siege da, one of the small holes on the ceramic discs was slammed shut. Drilled out with a mini drill and cleaned, screwed together and since then works again.
close
Share this post: