Fill bean container EQ7 PLUS

even though it's full

Violetta

June 01, 2022 09:35 pm

Unregistered

QUOTE (Guest_Frank @ Sunday, 03 April 2022, 19:20)

Hello all... unfortunately we also have the problem that only every 2nd reference comes. Always in alternation... With the message refill beans. I have disassembled and cleaned the grinder. Nevertheless, the error continues. Not comprehensible is that always only every 2nd reference to the error
. What is that for a logic ... because of current measurement and then display the error.

Hard to believe that it can be due to the grinder.... shy the 100€.
Does anyone have a tip? Thank you.

Hi all, I have the same problem with my eq.6. Has anyone found a solution to this problem?

Kruschjo

June 24, 2022 02:45 pm

Unregistered

Ahoy! I have now had the problem twice with my EQ.6 plus s 100.
In both cases, the solution was a curious handle. I pulled out the lever of the grinder (the Böppel in the bean hopper) with some force, turned on the machine and lo and behold, the error was gone. After the test coffee, I turned the machine off and pushed the lever back in.
The error remains gone.

No idea why, actually there should be no connection, but it works.

I hope the tip helps you too!

Janusz

July 21, 2022 08:23 pm

Unregistered

Thanks for the tip! We also had the same problem with our coffee machine and this has worked for us. The message "Fill bean hopper" is no longer displayed and the coffee machine works very well again.

Basteltante

September 29, 2022 04:09 pm

Coffee drinker

Group: Mitglieder

Posts: 1

Member No.: 59050

Joined: September 29, 2022

QUOTE (Kruschjo @ Friday, 24 June 2022, 13:45)

Ahoy! I had now with my EQ.6 plus s 100 also twice the problem.
In both cases the solution was a curious handle. I pulled out the adjustment lever of the grinder (the Böppel in the bean hopper) with some force, turned on the machine and lo and behold, the error was gone. After the test coffee, I turned the machine off and pushed the lever back in.
The error remains gone.

No idea why, actually there should be no connection, but it works.

I hope the tip helps you too!

Unfortunately I can not pull out the part, it is too tight.

Gast_bob

April 22, 2023 04:52 pm

Unregistered

same problem here with the neff machine with the asme inside as the siemens and bosch. first time ok seocond time error "fill Beans"even after rep[lacing the grinder unit.