Advanced search

back

New Topic

Impressa J9.2 does not start or goes off

Exi

February 28, 2022 07:07 pm

*

Coffee drinker

Group: Mitglieder

Posts: 4

Member No.: 47830

Joined: December 17, 2021

My machine either won't turn on at all or goes off at some point in the course of its work - always at different times. The circuit boards show no signs of overheating, varistor and NTC are OK, as is the transformer for the control electronics. Does anyone know this error and its cause?

Exi

March 17, 2022 03:23 pm

*

Coffee drinker

Group: Mitglieder

Posts: 4

Member No.: 47830

Joined: December 17, 2021

You can find good info about the problem in other forums. It is due to a weak point in a rectifier circuit. Components replaced, machine runs fine again.

NEMERY Guy   

September 26, 2023 09:38 pm

Unregistered

QUOTE (Exi @ Thursday, 17. March 2022, 15h23)
There is good information on this problem in other forums. It is a weak point in a rectifier circuit. The components have been replaced and the machine is working perfectly again.

Hello
My Jura J9 has these symptoms, which components should be replaced and at what price?
Thanks for your feedback

back

New Topic

Print this topic
Next Oldest Next Newest