Hello,
with my Caffeo CI I also have the system start problem in continuous loop.
Pump is new
Thermoblock new
Outlet valve new
Nevertheless, the pump does not manage to pump the water through.
My remedy:I take off the hose at the Y valve briefly. Then the pump flushes the thermoblock without problems. After that, everything runs normally again.
Then when I put a filter back in and somehow air gets in, no more water is pumped through. This also happens after the evaporation function. So as soon as air comes in somehow, it's over.
What can be the reason for this?
The pump does not manage to push out the discharge valve.
close
Share this post: