Hello community,
has following problem with the Cafamosa CF 100:
has following problem: brewing group drives up, in final position drive motor turns further up, pinion of drive motor then rusks through the tissues of the BG and makes terrible noise
has disassembled the machine, brewing group revised (BG runs super easy).
Then I discovered that the plastic flange of the drive motor broke off. I bought a metal bracket in the net and reinstalled the drive motor. The pinion of the drive motor and the gearbox of the BG fit together very well. Pinion of the drive motor is absolutely fixed to the gearbox of the BG.
Dry running of the BG manually upwards works without effort.
Thatched, the problem is solved. Then the machine started, result: BG runs up without any notable noises, but the motor does not switch off at the top, or BG is not led down in the other direction, but the same problem as before:
The motor simply stretches on and the sprocket rotates.
Does any of you have an idea what else could be defective?
>I am very grateful for tips.
Greetings
AQ friend
close
Share this post: