Again "water circuit empty" error

Ok I had this same issue and I searched for hours trying to find a fix with no luck. I ended up pulling the machine apart and noticed the water pump at the back of the machine wasn’t turning on. So I got the number off the pump and ordered a new one from eBay. After installing my machine then pumped water again I flashed the system afew times to remove air from the tubes then turned it off and back on. All is working normal again. Hope this helps..

Hello all!

I now have the same problem with my ECAM 370.95 and want to replace the front valve.
Is the valve cited here again and again the one circled in red in my picture?
If so, I have no idea how to get to it.
Are there any instructions for this?



Many greetings from the northMatthias