QUOTE (Taxb @ Wednesday, 22 August 2012, 10:39 am) |
Hello,
our machine is 6 months old and we had the problem described above.
Before we called the customer hotline, we first carried out all the procedures described above - without success.
The lady from the customer hotline asked if we use a water filter, which is true. The following procedure for checking:
Remove the water tank, remove the water filter, reinsert it. Open coffee powder container, wait for second beep, make normal coffee (second button from the left). Since that worked, we tried a normal cup of freshly brewed coffee afterwards. That worked too.
Ergo: it was the water filter, by the way not an original, but a cheap repro. We will now try this again with the original filter or leave it out.
During rinsing, the pump draws water through the system with more pressure than during brewing. Therefore the rinsing process works, but not the brewing process.
Hope it helps one or the other.
GreetingsYour
friendly tax office R&R |
To the "system start scandal"
: I had today with the just delivered Caffeo CI , remedy created "On/Off and MyCoffee" at the same time press. There was an initialization and everything was fine. By the way, it is located in the operating instructions under another item.
By the way, this is my second, at the first stand water under the machine (drain valve?) and I did not want to send the machine in. Melitta offers a complete overhaul for ne 149 Euro.
close
Share this post: