Single ear clamp

Hello
,there is always the question of how to open single ear clamps without damaging other parts. I recommend the use of a monierzange for this. If needed, please contact me via PN. I can still offer 1 unused (NEW) Monierzange with very good leverage.

Hello,

I have mine with a snap ring pliers expanded and then if necessary with a flat screwdriver still re-expanded.
After that the clamps were loose and I could take them off.

Just always depends on how you get to the clamp and whether it is attached to a plastic part or metal. I use a side cutter. Since everyone will have their own tricks. With pliers you have a good lever arm. And you can also tie iron if it is not a coffee machine.