Hello,
HELP please! Thank you in advance for your answers.
Problem:
After the brewing unit has been started up, the brewing process does not start again. This causes the brewing unit to shut down again immediately. Then follows the error message: "Clean the brewing unit".
Grinder works fine, but dry coffee powder disappears in the collecting tray.
Warm tea water works great, milk frother also works. Already done:
- Ceramic valve removed and completely cleaned (as described here in the forum
)- Brewing unit completely cleaned-
Hoses removed from ceramic valve and openings cleanedSDS / Service Menu:
- Up/down brewing unit works without problems
close
Share this post: