Dismantling instructions EA 9000

Image file 5

good luck

Dear,

How did you make the screw back / under the lid of bean reservoir to the outside?

And how do the doors go out there?

And...the coffee reservoir??

We have so many problems with the EA9000 - it's 4 times replaced by Krups - but it's drama after drama. It's just all we're gonna get is ditch water. The dry coffee goes into the drip tray before use. The inside is full of dry unused coffee.

This Krups EA9000 is the 4th and is not yet 2 years old and there is 1 to 2 times a day 60 - 120 ml of coffee made with it.

Gruß aus Holland

Hey people
My EA9000 had error code 13 displayed and gone into automatic maintenance. Couldn't do anything anymore. Guarantee also already past is clear yes.
Had she then sent in to me to make a cost estimate. Estimate came with 237,- Euronen. Thought to me then it's not worth sending them back again.
Had then said Hop or Top I test times this manual must admit this manual even if there are only pictures, is more than ingenious today I have disassembled my 9000s and cleaned everything reassembled test run and see since you works again as on the first day. And to top it all off, the workshop supplied me with a total of 10 more screws and hinges for a complete door in my machine. They must have dumped their garbage in my machine. I will also write a nice letter to them and send it to you.
Many thanks

Danke vielmals, K_Bohne. Sie haben viel Frust gelindert!

Thank you very much, K_Bohne. You have relieved much:D frustration!

Hi guys I bought used the krups e9010, and while using it everything was normal until one time I hear a strange sound and when checking I see that in the used coffee there was a part that you can see in the first image, and after checking on youtube videos I found that goes in the highlighted yellow part, so my question is can I still used the coffee machine? the piece was like bend, thanks for your help